unotec Bt-Earbuds Manual De Uso página 3

C. Volume, mute and track change.
Volume up and down: Press once the + button or -
Track forward or backward: Press 3 seconds the + button or the -
button (phone dependent)
D. On, off and battery check
Switching the device: Press the center button 2 seconds.
Activate the pairing mode: Press the center button until the red and
green LEDs flash.
Check the battery level: Press the middle button a voice when the
device is turned on. The LED flashes green if the battery is fully
charged or. If less than 15 minutes of use (call) flashes red.
COnneCting Wireless HeaDsets WitH tHe pHOne
A. Preparing the unit
Turn on the device by pressing the center button until the red and
green LEDs flash. The red and green LEDs blinking means that the
device is in pairing mode. (Just do it the first time).
If the device has already been linked before, we just turn on the device
by pressing the center button until the green LED.
B. Preparing the phone
On the phone we want to connect to the device, turn on Bluetooth and
start searching for devices (see your phone manual for how to do this).
Bluetooth devices to show us the phone must select "S6" to proceed
to link the phone with the device. If we ask for a password, we enter
0000.
Once paired, the LED stops flashing in red and green.
Now we can use all the features of the device.
english 3