Bimar PA100 Manual De Instrucciones página 16

potentially hazardous and must be disposed of according to applicable regulations in
recycling containers. Warning: any stickers or advertising leaflets applied must be
removed before using the appliance.
 Before connecting the appliance, check that the voltage on the data plate matches
that of the electric system. In the event of incompatibility between the power socket
and the appliance's plug, have the plug replaced with a suitable model by a qualified
professional, who should ensure that the cable is appropriate for the power rating of
the device. The use of adaptors or extensions is generally not advisable; if it is
necessary to use them, they must comply with safety regulations and the total current
(amps) must not be rated lower than the maximum current of the appliance.
 Before each use, check that the appliance, especially the HEPA filter and UV lamp) is
in good condition and that the power cord is not damaged: if in doubt consult a
qualified professional.
 The plug point must be accessible so as to easily remove the plug in case of an
emergency.
 Stand the appliance on a flat, horizontal and stable surface, and keep it away from:
- fans
- heat sources (e.g. open flames, gas stoves, fire places etc.), flammable gasses or
explosive materials
- liquids (e.g. from bathtubs, showers, sinks etc.) to avoid splashing water and to
prevent it from falling into them (the appliance should be kept a minimum of 2
metres away).
- fabrics (curtains, etc.) or floating materials/particles that may block the aspiration
grid; check also that the front part is free from floating particles (dust, etc.).
16/52