Pre-Use Check - DePuy Synthes Purevue Manual De Instrucciones

4.7

Pre-Use Check

To ensure that the Camera Control System and other required video-system components are
properly connected and functioning:
1 . Power on the Camera Control System and connected display after setting up the
device and attaching the Camera Head . Video appears on the display only if the entire
video system is properly connected .
2 . Ensure that the Light Source activates by touching the Light Source Control button on the
Home Screen .
3 . If there is no video, review the setup instructions in the Instructions For Use included
with each device to ensure all devices are properly installed, and consult "6 .1, Pre-Use
Troubleshooting" .
If the problem persists, call Customer Service at +1 (800) 382-4682 in the United States or
contact your DePuy Synthes representative . Outside the United States, contact your local
representative .
NOTE: Complete the pre-use checks before each use of the camera to ensure the device is
functioning properly prior to surgery.
WARNING! Do not use the device if it is improperly installed or if it is not functioning
properly after setup.
WARNING! Do not look directly into the light source. The intense light may cause eye
injury.
21