Installation - Everbilt UT03301 Guía De Uso Y Cuidado

Installation

CAUTION:Always use the handle to lift the pump. Never use the power cord to lift the pump. To avoid skin burns, unplug the pump and
allow time for it to cool after periods of extended use.
1
Connecting a 3/4 in. garden hose
NOTE: Be sure the 3/4 in. garden hose thread connector has
a rubber gasket to minimize water leaks.
NOTE: The larger the inside diameter and the shorter the
length of hose, the less pressure that is lost (or the larger the
flow rate).
Attach a 1 in. female adaptor (B) to the pump discharge.

Attach a garden hose with a 3/4 in. garden hose thread (not

included) to the adaptor (B).
2
Connecting a 1-1/4 in. hose kit
WARNING:Secure the discharge hose before plugging in
the pump. An unsecured discharge hose may
"whip"possibly causing personal injury, and/or property
damage.
If you would prefer to use a 1-1/4 in. hose kit (not included) in
order to pump water away more quickly.
Attach the adaptor (B) to the pump (A) discharge.

Securely attach the hose kit (not included) to the adaptor (B).

6