Controls - Maytag RS-1 Guia Del Usuario

Controls

The control panel is designed for ease in programming. The display window on the
electronic control shows time of day. NOTE: Styling and features may differ slightly
depending on the model.
Function Pads
•
Press, or press and hold, these
pads to enter time, oven tem-
perature or to select HI or LO
broil. No beep will sound
when these pads are pressed.
•
Press this pad to cancel all
operations except the Timer
and Clock.
•
Function pads are the Bake, Broil, Clean,
Timer, Clock, Cook Time, Stop Time,
and Cancel pads. A beep will sound when
these pads are pressed.
•
All function pads except the Cancel pad
feature an indicator light.
When Bake or Broil pad is pressed, the
indicator light will turn on to let you
know that the oven is set for this opera-
tion.
Indicator lights on Clean, Timer,
Clock, Cook Time and Stop
Time pads will flash when the
pad is pressed. These indicator
lights will stop flashing but will
remain lit once the function
starts.
•
If an indicator light on a function pad is lit
and you set a second operation:
– Either the control will not accept the
operation or
– The indicator light on the first pad will
"dim" slightly and the indicator light
on the pad you just presse will be "full
on." This lets you know that you have
set the control for two operations.
For example: If you set the oven to
bake at 350°F and then set a timing
operation, the indicator light on
the Bake pad will "dim" and the
indicator light on the Timer pad
will be "full on."
The display will show the opera-
tion for the pad with the "full on"
indicator light. Press the function pad with
the "dim" indicator light to recall that
operation.
NOTE: If more than 30 seconds elapse be-
tween pressing a function pad and a
pad, the program will be canceled and the
display will return to the previous display.
Bake Pad
Use for baking or roasting.
1. Press Bake pad.
2. Press or pad until the correct oven
temperature appears in the display.
See page 8 for additional information.
Broil Pad
Use for top browning and broiling.
1. Press Broil pad.
2. Press or pad for HI or LO broil.
See page 10 for additional information.
Clean Pad
Use to set self-clean cycle.
1. Close and lock oven door.
2. Press Clean pad. "3:00" will appear in the
display.
3. Oven will automatically clean for 3 hours
or press or pad to select 2 to 4 hours of
cleaning.
See pages 12-13 for additional information.
Cook Time/Stop Time
Pads
Use to program the oven to start and stop
automatically.
1. Press Cook Time pad and enter the desired
cooking time.
2. Press the Bake pad and enter oven tem-
perature.
3. To delay the start of cooking, press the
Stop Time pad and enter the time you wish
the oven to turn off.
See page 11 for additional information.
Setting the Clock
1. Press the Clock pad.
2. Press or press and hold the or pad until
the correct time of day appears in the dis-
play.
The display will flash when electrical power is
or
first supplied to the range or if there has been
a power failure.
To recall the time of day when the timer is
displayed, press the Clock pad.
Clock time cannot be changed when the oven
has been programmed for clock controlled
cooking, self-clean or delayed self-clean.
4