Removing/Changing Over The Sealing Mat; Side-By-Side Installation - Thermador T18 Serie Instrucciones De Instalación

Removing/changing over
the sealing mat
Freezers are fitted with a sealing mat at the factory for

side-by-side installation.

If a single appliance is installed, the sealing mat is not
required and can be removed.
The sealing mat is essential for side-by-side installation.
If the door hinges were fitted to the other side of the door,
the sealing mat must be attached to the other appliance.
Always attach sealing mat to the right side of the
appliance situated on the left.
28
Side-by-Side installation
If a Side-by-Side installation is intended, now connect the
two appliances together.
1. Unpack the Side-by-Side kit and check that no parts
are missing.
Keep ready the anti-tip brackets as an installation
aid.
2. Place the appliances next to each other in the
intended configuration.