Home Decorators Collection 516-735 Manual De Instrucciones página 6

INSTALATION & ASSEMBLY:
1.Carefully unpack the fixture. Lay out all parts on a clean surface.
2.Feed the Wires (#4) of one Arm Assembly (#3) in through one side hole of the
Wire Housing (#5) and through its top opening. Secure each Arm Assembly (#3)
to the Wire Housing (#5) using a Lock Nut (#6), as shown, using the provided
Wrench (#26) (Fig. 1).
4. Wires
3. Arm
Assembly
5. Wire
Housing
6. Lock
Nut
26. Wrench
Fig. 1
3.Unravel the two Extension Wires (#7 & #8). Feed the two Extension Wires (#7
& #8) into the bottom opening of the Wire Housing (#5) through to the top
opening (Fig. 2).
4.Using the provided Wire Nuts (#9), make wire connections between the White
Extension Wire (#7) and the White Arm Assembly Wires (#10) and between the
Black Extension Wire (#8) and the Black Arm Assembly Wires (#11), as shown.
Wrap each wire connection with 2" of electrical tape (Fig. 2).
Page 6