I
I
12. Stand the assembled unit upright.
13. Pick up the Door (I) and attach the extended Hinge Arms to the Hinge Bases installed on the Left Side
Panel (B). Loosen the bolt on the back of Hinge Base for an easy fit. Align and insert the "U" slot on
Hinge Arm under the bolt head on the back of Hinge Base. Make sure that both door hinges engage and
function properly. Tighten the bolt on the Hinge Base to lock the hinges in place.
14. Open and close the door to make sure it is aligned and shut correctly. If necessary, adjust the screws for
a good fit. Refer to the hinge sticker on the door for adjustment.
Assembly Instructions
B
1
B
2
B
I
13