Work Pro CLUBMASTER 1 PH Instrucciones De Usuario página 3

CHANNEL CONTROLS & FUNCTIONS
1
2
3
4
5
6
5. BAL
The BAL control sends continuosly variable amounts of the post fader signal to either the left or right.
In the center position equal amounts of signal are sent to the left and right.
6. PFL
You can listen the signal of the only channel which PFL switch is turned "ON". So PFL routes the
channel signal to the monitoring system (Vumeter and headphones). If more than one PFL is
selected, the mixer shows the sum of them
7. CHANNEL FADER
60 MM fader. Its function is to adjust the volume of signal connection into each channel and
adjust the output volumen together with Master fader.
CLUB MASTER 1 PH
DJ MIC CHANNELS
7
User Manual/Manual de Instrucciones
1. DJ MIC PRIORITY SELECTOR
You can select whic DJ MIC channel has priority.
When you select one channel, it has priority and
the rest of inputs and the unit reduces the level
of these channels.
2. HIGH
Control the high frequency tone of each channel.
Always set this control to the 12 o´clock position,
but you can control the high frequencies tone
according to the speaker, the conditions of
listening position and listener´s taste. Clockwise
rotation of the control, increases the level.
3. MID
Control the high frequency tone of each channel.
Always set this control to the 12 o´clock position,
but you can control the mid frequencies tone
according to the speaker, the conditions of
listening position and listener´s taste. Clockwise
rotation of the control, increases the level.
4. LOW
Control the high frequency tone of each channel.
Always set this control to the 12 o´clock position,
but you can control the low frequencies tone
according to the speaker, the conditions of
listening position and listener´s taste. Clockwise
rotation of the control, increases the level.
Pag 2
EN