aintenance
M
❋ Before cleaning the washer interior, unplug the electrical power cord to avoid electrical
shock to avoid electrical shock hazards.
❋ When disposing of the appliance, cut off the mains cable, and destroy the plug Disable
the door lock to prevent young children being trapped inside.
The water inlet filter
- "
" error message will blink on the control panel when water does not enter the
detergent drawer.
- If water is very hard or contains traces of lime deposit, the water inlet filter may become
clogged.
It is therefore a good idea to clean it from time to time.
18
1.
Turn off the water tap.
2.
Unscrew the water inlet hose.
3.
Clean the filter using a hard bristle
brush.
4.
Tighten up the inlet hose.