Fig. 3a
3. Repeat Step 2 to attach the Right Side (Gc).
4. Fasten Top (Ic) in place with six 4x30mm Phillips Screws (B) through the pre-drilled holes in the
cleats. See Figures 4 and 4a. Make sure the groove in the back of the Top (Ic) aligns with the
groove in the back edge of each side.
B
Fig. 3
Ic
Fig. 4
B
B
B
B
Gc
B
Fig. 4a
975Wc – Page 4 – Rev. 08/08
B