Speci Cations - KlipXtreme KTM-876 Guia Del Usuario

1. Hang the screen with the VESA plate onto the top of the arm bracket.
2. Then replace the bottom mounting bolt and nut removed earlier. Tighten the four
screws to firmly secure the display onto the wall, as shown in the figure below.
3. At this point you will be able to adjust the tilting angle by loosening or tightening
the screws (+3º y -10º) until you get the desired viewing position.
4. Then, adjust the rotation angle moving the central shaft of the mounting arm
assembly to the right or to the left. Take into account that the size of your TV
screen will determine the rotation angle.
5. Finish by pushing or pulling the articulating arm until the optimal distance from the
wall is reached.
6

Speci cations

• TV type and size: 32-60in flat and curved screens
• Load capacity: 66lb
• VESA compatibility: 100x100,200x100,200x200,300x200,300x300,
400x200,400x400
• Tilt angle: +3°~-10°
• Swivel angle: (180°) +90°~-90°
• Profile: 62-422mm
• Unit dimensions: 16.6x17x17in
• Material: Steel and plastic
• Weight: 5.4lb
• Color: Black
• All necessary hardware included
7