Hoover IRONspeed SRD 4106 Instrucciones De Funcionamiento Y Manual Del Usuario página 9

Chapter 2.3 - Switching on the Appliance
Chapter 3: Using Your Steam Generator
Chapter 3.1 - Regulating the Soleplate Temperature
8 -
GB
Ironspeeed_SR__1-15_union_pprod3.indd 8
Warning: Do not put any vinegar, hot water, perfume, or any other kind of chemical
agents or any other contents in the water tank. It could damage the steam
generator and shorten its life use.
Domestic Iron Models:
Connect the appliance with the mains cord to the earthed socket. Press on the on/
appliance is running on and that the boiler is heating up.
you can start using steam.
Professional Iron Models:
Connect the appliance with the main cord to the earthed socket. Press the iron on/
turned up and inform you that the appliance is running on. The iron soleplate and
the boiler are heating up.
N.B.
It's quite normal and will disappear quickly.
This is due to a treatment applied to the soleplate that improves the steam performance.
Before use, please use the iron as described in Chapter 3.4 Vertical Steam Ironing.
Do this for all three presets (See Chapter 3.3) until the water tank is empty.
Select the temperature of the soleplate by turning the dial (12) on the iron to the
will indicate you that the soleplate has reached the requested temperature.
adjusts without interrupting ironing.
Help:
To know the best suitable temperature for each textile, check the laundry care label of
the article to be ironed. Please note that during use, the temperature light goes on from
adequacy with the most delicate one.
If you select a lower temperature while ironing, wait until the iron has cooled down to
the set temperature before you continue ironing.
If the temperature is too low, some drops of water could escape from the soleplate.
Please raise up the temperature abov to avoid this issue
11-12-2009 9:59:56