Summer Sure & Secure 12434 Manual De Instrucciones página 4

NON-FOLDING BEDRAIL SET UP:
Step 1:
Hold both ends of the Lower Frame with Fabric and pull
apart SLOWLY until there are two audible locks in the
center (Figure A). Ensure the frame is locked by pushing
in opposite direction, and there is no movement.
Step 2:
Assemble the Frame Corners by sliding them together,
until there is an audible lock in the center.
(Figure B)
Step 3:
Slide assembled Frame Corner into the holes between
the fabric cover attached to the Lower Frame with Fabric
until audible lock.
(Figure C)
Step 4:
Zip bedrail and cover zipper with attached cover.
(Figure D)
Step 5:
Attach end of Frame Corner Connector with straps
into underside of the Lower Frame with Fabric until
there is an audible lock.
(Figure E)
NOTE: Entrapment bar is to be placed on the inside
against mattress and not facing out.
Step 6:
Ensure the bedrail is centered on the mattress end to end.
Using enclosed template, measure AT LEAST 9 inches
between the ends of the bedrail and the headboard
and footboard.
(Figure F)
NOTE
M A T T R E S S
At least 9 inches
F
(CLICK)
A
(CLICK)
Pin
B
(CLICK)
C
D
(CLICK)
E
Bedrail Panel
(CLICK)
(CLICK)
At least 9 inches