6. TROUBLESHOOTING&TRANSPORT
6.1 t rouble Shootin G
If you still have a problem with your appliance after checking these basic
troubleshooting steps, please contact an authorised service person or qualified
technician.
Problem
Oven does not switch
on.
No heat or oven does
not warm up.
Oven light (if available)
does not operate.
Cooking is uneven
within the oven.
The appliance door
cannot be opened; the
door lock symbol or
signal lamp lights up on
the display.
The timer buttons
cannot be pressed
properly.
The oven fan is noisy.
After the "pyrolysis"
cleaning cycle, it is not
possible to select a
function.
6.2 t ran SP ort
If you need to transport the product, use the original product packaging and carry it using
its original case. Follow the transport signs on the packaging. Tape all independent parts to
the product to prevent damaging the product during transport.
If you do not have the original packaging, prepare a carriage box so that the appliance,
especially the external surfaces of the product, is protected against external threats.
Possible Cause
Power is switched off.
Oven temperature control is incorrectly
set.
Oven door has been left open.
Lamp has failed.
Electrical supply is disconnected or
switched off.
Oven shelves are incorrectly
positioned.
The appliance door is locked due to
the pyrolytic function.
There is foreign matter caught
between the timer buttons.
Touch model: there is moisture on the
control panel.
The key lock function is set.
Oven shelves are vibrating.
The oven cools itself by operating the
cooling fan after "pyrolysis".
Check whether there is power supplied.
Also check that other kitchen appliances are
Check that the oven temperature control
Replace lamp according to the instructions.
Make sure the electrical supply is switched
Check that the recommended temperatures
and shelf positions are being used.
Do not frequently open the door unless you
are cooking things that need to be turned.
If you open the door often, the interior
temperature will be lower and this may affect
Wait until the cooking compartment has
cooled and the door lock symbol goes out.
Remove the foreign matter and try again.
Remove the moisture and try again.
Check whether the key lock function is set.
Check that the shelves and any bake ware
are not vibrating or in contact with the oven
Verify whether the door locking device has
switched off. If it has not, the oven is still in
the cooling period. During the cooling fan
period, no cooking function can be operated.
EN - 22
Solution
working.
knob is set correctly.
on at the wall socket outlet.
the results of your cooking.
Check that the oven is level.
back panel.