How To Wire Your Ceiling Fan - Emerson Duo CF560BS00 Manual Del Propietário

If you feel that you do not have enough electrical
wiring knowledge or experience, have your fan
installed by a licensed electrician.
WARNING
!
Turning off wall switch is not sufficient. To avoid
possible electrical shock, be sure electricity is
turned off at the main fuse box before wiring. All
wiring must be in accordance with National and
Local codes and the ceiling fan must be properly
grounded as a precaution against possible
electrical shock.
5.1
Securely connect the Ceiling Mounting Plate Green Wire
and the Supply Green Grounding Wire (this may be a bare
wire or a wire with green insulation) to the Fan Motor
Assembly Green Wire using a Wire Connector (supplied)
(Figure 9).

5. How to Wire Your Ceiling Fan

CAUTION: To reduce the risk of electrical shock,
disconnect the electrical supply circuit before
installing the fan, light fixture or receiver.
NOTE: Make all wiring connections using wire
connectors (supplied). Make sure that all connections
are tight, including ground, and that no bare wire is
visible at the wire connectors, except for the ground
wire.
SUPPLY
GREEN
GROUNDING
WIRE
FAN MOTOR
ASSEMBLY
GREEN WIRE
Figure 9
10
CEILING MOUNTING
PLATE GREEN WIRE
U.L. Model No.: CF560