Mahlkonig E80 SUPREME Instrucciones De Uso página 43

Contents
Overview ............................. 2
Scope of delivery ............... 42
General .............................. 44
Reading and retaining
the opera ng manual ................. 44
Explana on of symbols used ...... 44
Safety ................................. 46
Intended use ............................... 46
Safety informa on ...................... 46
Before using for
the fi rst me ...................... 49
Func oning and basic se ngs ... 49
Checking the grinder and
scope of delivery ......................... 49
Se ng up the grinder and
inser ng the bean hopper .......... 50
Se ng up the portafi lter
support and spout ...................... 51
Opera on .......................... 52
Adding espresso beans ............... 53
Switching on the grinder ............ 53
Se ng the grinding degree ........ 53
Selec ng recipes ......................... 54
Se ng or changing the
recipe/grinding me ................... 54
Star ng grinding ......................... 55
Interrup ng grinding .................. 56
Rescue bu on grinding ............... 56
Changing the type of espresso
beans ........................................... 56
Using the main menu ........ 58
Display/naviga on symbols ........ 58
Accessing and leaving
the main menu............................ 59
Cleaning ............................. 60
Cleaning the grinder
installa on surface ...................... 61
Cleaning the casing ..................... 61
Cleaning the spout system.......... 61
Cleaning the bean hopper .......... 62
Cleaning the grinding
mechanism with GRINDZ
Cleaning the grinding
mechanism manually .................. 64
Cleaning the fl apper ................... 65
Maintenance ..................... 65
Changing the burrs ..................... 65
Adjus ng the burrs ..................... 66
Changing the fl apper .................. 67
Troubleshoo ng ................ 68
Technical data .................... 72
Disposal ............................. 73
Disposing of the packaging ......... 73
Disposing of the grinder ............. 73
Maintenance and service .. 73
E80 SUPREME | EN
TM ......... 63
43