Interrup Ng Grinding; Rescue Bu On Grinding; Changing The Type Of Espresso Beans - Mahlkonig E80 SUPREME Instrucciones De Uso

ESPRESSO GRINDER

Interrup ng grinding

Grinding stops automa cally when you remove the portafi lter from the por-
tafi lter intake(12) and con nues with grinding when you insert the portafi lter
back into the portafi lter support again and press the start bu on (11) .
1. Remove the portafi lter from the portafi lter intake during grinding to
interrupt grinding and stop the grinding me. The symbol of the selected
recipe fl ashes.
2. Reinsert the portafi lter between the portafi lter intake and the portafi lter
support (10) before the abort me elapses.
The suspended grinding process is con nued automa cally un l the
grinding me has elapsed.
• If you do not want to con nue with the grinding process,
then press the controller bu on (3).
The display jumps directly to the selected mode and the pre-
viously suspended me is deleted.
• The dura on of the abort me can be set via the menu.

Rescue bu on grinding

In the event of a display failure, grinding can be carried out using
the rescue bu on.
1. Press the rescue bu on (22) with the help of a thin screwdriver or a
similar tool.
The grinder starts the grinding process.
2. End the grinding process by no longer pressing and holding the rescue
bu on.

Changing the type of espresso beans

1. Lock the bean hopper (1) by pushing in the slider (18).
2. Grind any espresso beans le in the grinding mechanism un l the grinder
runs empty.
3. Rotate the bean hopper an clockwise to release it from the grinder and
li it upwards to remove it from the grinder.
4. Remove the remaining espresso beans from the bean hopper.
5. Remove any excess beans from the bean hopper intake (2) (see Fig. B).
6. Place the bean hopper onto the bean hopper intake.
56