Cleaning The Bean Hopper - Mahlkonig E80 SUPREME Instrucciones De Uso

ESPRESSO GRINDER

Cleaning the bean hopper

The bean hopper must be cleaned daily to remove any coff ee oil
residue, as this can have a detrimental eff ect on the taste.
1. Lock the bean hopper (1) by pushing in the slider (18).
2. Grind any espresso beans le in the grinding mechanism un l the grinder
runs empty.
3. Rotate the bean hopper an clockwise to release it from the grinder and
li it upwards to remove it from the grinder.
4. Transfer the espresso beans into another container temporarily.
5. Clean the bean hopper inside and out with a damp cloth and then dry it.
6. Remove any excess beans from the bean hopper intake (2).
7. Place the bean hopper onto the bean hopper intake.
When placing the bean hopper on, make sure that you place the nose
of the bean hopper into the corresponding recess in the bean hopper
intake.
8. Push the bean hopper down slightly into the bean hopper intake and
turn the bean hopper clockwise to fi x it to the grinder.
9. If the bean hopper cannot be fi xed in place by turning it, it may not be
posi oned correctly. In this case, align the bean hopper correctly (see
step 7) and then try again by pressing it down and turning it (see also the
"Troubleshoo ng" chapter).
10. Pour the new espresso beans back into the bean hopper.
11. Open the bean hopper by pulling out the slider.
62