ESPRESSO GRINDER
Troubleshoo ng
Fault
Cause
• The power
The grinder is
not grinding,
the display is
not lit up.
• The bean hop-
• The overcur-
• The electri-
68
Remedy
Insert the power plug into a properly
plug is not
plugged into a
socket.
Insert the bean hopper (see chapter
per is not
inserted.
Check whether the circuit breaker's
rent protec on
switch was
triggered.
Check the electrical fuse. Bring it back
cal fuse has
tripped.
installed socket.
"Se ng up the grinder and inser ng
the bean container").
release bu on has popped out. Push it
back in if necessary. If the switch con-
nues to pop out, contact your service
partner (see the sec on "Maintenance
and service").
to its original state or swap it. Check
whether other loads are connected to
this fuse and if so, pull their plugs. If
the back-up fuse trips repeatedly, con-
tact your service partner (see chapter
"Maintenance and service").