Tools Required - Whittier Wood Furniture Campbell 836W Instrucciones De Montaje

ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED: Hex Wrench (provided), Phillips Screwdriver,
A
x 4
A
1) Spread a thin layer of glue in the dowel holes of the Front/Back Aprons (03) and insert dowels (A).
Gently tap with a padded hammer and quickly wipe up any excess glue with a damp rag. See
Figure 1.
Fig. 2
2) Glue Upper Back (02), Middle/Lower Backs (09), Front/Back Aprons (03) and Front Stretcher (06)
into the Right Side (05). See Figure 2.
Page 3 — 836W — 12/08
836W Campbell Chair
Rubber Mallet or Padded Hammer, Wood Glue
03
A
06
03
05
A
03
Fig. 1
03
09
09
A
02