Whittier Wood Furniture Campbell 836W Instrucciones De Montaje página 5

07
5) Screw the Front Corner Blocks (08) and Rear Corner Blocks (07) into the appropriate corners
with eight 4x30mm Pan Head Screws (D). The rear corner blocks are larger than the front blocks.
Also, the rear blocks are marked with an "R" and the front blocks are marked with an "F". See Figures
5 and 5a. Blocks must not protrude above the aprons. Otherwise, the seat will not set properly.
Fig. 6
6) Center the Seat (01) on the aprons. To fasten the seat, use the predrilled holes on the corner blocks
as guides and insert eight 5x60mm Pan Head Screws (C). See Figure 6.
Page 5 — 836W — 12/08
Fig. 5
D D
D
D
D
D
C C
C
C
01
07
08
D
D
C
C
D
D
Fig. 5a
D
x 8
C
x 8