Mode Button; Reset Button - GAS GAS PAMPERA 125 2007 Manual Del Usuario

Operation of the buttons

MODE BUTTON

1. Press the MODE button to switch from one function screen to another when the speed sensor detects no signal.
2. Press the MODE button to switch from one partial screen to another when the speed
sensor detects a signal.

RESET BUTTON

1. Press the MODE button to reach the appropriate screen, and then press RESET
for 2 seconds to return the data stored in TRIP 2, MAX and MAX RPM to zero
separately.
2. Return the data in TRIP 1, AVG and RT at the same time. The data of the ODO,
CLOCK and TT. cannot be returned to zero.
OPERATION OF THE GEAR CHANGE ACCORDING TO RPM
1. Press the MODE button to switch to the RPM screen; accelerate to the rpm which is desired for the gear change indicator to be activated.
2. Press the RESET button to confirm and establish the gear change indicator according to the rpm.
3. The tachometer with bar graph and a LED will flash to indicate the need to change gear.
4. Use the steps 1 and 2 to readjust the gear change according to RPM.
- 45 -