Package Contents - Grandstream GSC3615 Manual Del Usuario

OVERVIEW
EN
The GSC3615 is a high-definition, weatherproof, Infrared (IR) IP box
camera, ideal for monitoring in environments such as homes, offices,
banks, hotels, retail, warehouses, and building entrances. The GSC3615
integrates with Grandstream's free management utility software GSURF
Pro, allowing video feeds as well as the device itself to be fully managed
by this software, along with other ONVIF-compliant video management
systems. Powered by an advanced Image Sensor Processor (ISP) and
state-of-the art image algorithms, the GSC3615 delivers 1080p FHD
video resolution and offers exceptional H.264/H.265 performance with
HTTP API for 3rd party redevelopment. It features SIP/VoIP technolo-
gy with 2-way audio and video streaming feeds loaded directly to smart
phones or SIP endpoints. The GSC3615 is equipped with integrated PoE
for seamless installation, IR LEDs, and interfaces for external micro-
phone and speaker. The combination of the GSC3615, Grandstream's
GSC3570 intercom phone, GXP/GRP IP phones, GXV video phones,
portable WP Wi-Fi phones, and GS-Wave Mobile APP provides a com-
plete end-to-end solution for video intercom, security monitoring and re-
cording needs.
PRECAUTIONS
• Do not attempt to open, disassemble, or modify the device.
• Do not expose this device to temperature outside the range of -20 °C
to 50°C and environment humidity more than 95% (non-condensing)
• Please install camera correctly for a smooth operation.

PACKAGE CONTENTS

1x GSC3615
1x Waterproof RJ45
Socket (5 pieces)
1x Hex Key
1x Drill Template
1x Quick Installation
3 x Wall Anchors
Guide
and Screws
~1~
POWERING AND CONNECTING THE GSC3615
The GSC3615 can be powered either using the right PSU (DC12V, 1A) or
using a PoE switch, Please refer to illustration below to do the wiring and
connect the waterproof RJ45 socket:
Option A (Recommended)
Step 1: Based on T-568B to install the RJ45 plug, tighten the connector
using the provided waterproof socket.
Step 2: Connect other end of the cable into a switch supporting Power
over Ethernet.
Option B
Step 1: Wire the cable and connect it to a network switch like steps in
Option A.
Step 2: Connect a 12VDC, 1A (minimum) Power Adapter (not provided)
to the power socket of the GSC3615 tail cable. Make sure the polarity "+"
(center) and "-" (outside) are correctly connected.
MOUNTING GSC3615
Step 1:
Use supplied drill template to drill holes at ceiling. Select appropriate an-
chors or screws based on ceiling material. Insert the anchors if necessary.
~2~
Ceiling