Keep Out F80 Manual Del Usuario página 16

EN
profiles. Just click on any of them and "Apply" to activate.
3. Macro Function
- To program a macro, follow these steps: (For example we
will set the "G1" key)
- First, click the key you want to program, in this case "G1".
Then the configuration window opens.
- To create a new 'Macro' click on "+" and if you want you
can assign a custom name to the macro.
- To record the macro click the "Record" option, it will start
recording the "Macro". For example, if you want to burn the
letter combination "WASD" press "Record" and then press
on your keyboard the letters "WASD". When finished, click
"Record". (You can also change the "Delay time", for this
click on the "Delay" column, as shown in the picture.
- The "delay" is the delay between the keystrokes that are
entered in the macro. It is measured in milliseconds.
- Once we have programmed the macro, click on "OK" to
save. Now every time you press the "G1" key, you will be
writing the "WASD" command.
- We can also assign a function to a key as a "Copy", "Paste",
and "Open". We'll just have to click the button you want to
modify and assign a function as shown in the picture, then
click "Ok".