Care Instructions - Stryker 4126-000-000 Instrucciones De Uso

EN
To Replace Battery
WARNING: After installation, DO NOT
remove a non-sterile battery from
a sterile housing. If a new battery
is required, use another sterile
battery protector kit and perform the
installation procedure.
NOTE: It is important to keep non-sterile
batteries as clean as possible because they
cannot be sterilized.
1. Wipe debris from the aseptic housing.
2. Rotate the latch counterclockwise 90° to
the unlocked position. Open the lid.
3. Using the battery handle, lift the non-
sterile battery out of the aseptic housing
chamber.

Care Instructions

For processing instructions and disposal/
recycle information, see the care instructions
manual supplied with the handpiece.
8
Print Date: Jun 14, 2016 11:18:38 AM
0000003946, Rev. L Effective Date: Jun 14, 2016 10:36:00 AM
4126-120-700 Rev-L
www.stryker.com