Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
I
NSTALLATION
1. Plug the telephone line cord into a modular wall jack.
2. Connect the telephone line cord from your
telephone into the jack on the back of the answerer
marked PHONE. (You don't have to connect your
telephone in order for the answerer to record
incoming messages.)
3. Connect the small end of the power supply into the
POWER 9V AC jack on the back of the answerer. Plug
the other end into an AC power outlet. The unit beeps
3 times and is ready for setup or to answer calls with
the default greeting and settings.
CAUTION: Only use the ATLINKS USA, Inc. 5-2434A (white)/5-2418A (black)
power supply that was packed with this unit. Using other power supplies may
damage the unit.
INSTALLATION INFORMATION
• Never install telephone wiring
during a lightning storm.
• Never touch uninsulated telephone
wires or terminals, unless the
telephone line has been
disconnected at the network
interface.
• Use caution when installing or
modifying telephone lines.
5
Publicidad
Capítulos
Tabla de contenido
