Assembly; Accessories; Use - Imetec ECO EXTREME SILENCE Instrucciones Para El Uso

EN
IMPORTANT! The vacuum cleaner has a motor protection thermostat,
which intervenes in the case of overheating (caused by the inlet opening,
filters, etc. being clogged). If it is triggered, press the ON/OFF button
to switch the appliance off and let it cool down for a few hours. Verify
whether dust has clogged the filters or the inlet opening before restarting
the appliance.
• Connect the flexible suction pipe (5) to the inlet connection (13) of the appliance. Pay
attention to the correct position of the stop device; it is fastened securely when it clicks
into place [Fig. B1].
• Connect the handle (1) of the flexible pipe to the suction pipe (3). Adjust the length of
the telescopic pipe by pressing the adjustment button (3B) in the direction of the arrow
and removing or retracting the telescopic pipe [Fig. C1].
• Select the combination brush (4) or the accessory (18) suited to the surface to be
cleaned and connect the part to the telescopic pipe (3).
Combination carpet/floor brush (4)
adjust the combination brush according to the type of flooring, using the toggle switch (4A)
[Fig. D1]:
• Toggle switch (4A) with the symbol
• Toggle switch (4A) with the symbol
Your appliance is equipped with the following attachments:
Crevice tool (18A): To clean corners and crevices, such as radiators, skirting boards,
blinds and awnings.
Dusting nozzle (18B): To clean small objects, audio and TV appliances, computers and
furniture.
Upholstery nozzle (18C): To clean sofas, armchairs, upholstered chairs and curtains.
Parquet brush (18D): Special brush to clean parquet floors.
NOTE:
The accessories can be connected to the suction pipe (3) or directly to the handle
(1).
One of the three accessories can be stored in the accessory-holder (19) on the telescopic
pipe (3) if it is not used.
Pull the power cable (14) completely up to the red mark, and insert the plug into the socket.
The yellow mark on the cable is before the end part of the cable with the red mark.
12

ASSEMBLY

ACCESSORIES

facing upwards: for hard flooring.
facing upwards: for rugs and carpets.

USE