Gree RIO09AC11V1A Guía Rápida

INDOOR UNIT FRONT PANEL DISPLAY: Look here for LED display of system
status, setpoint, indoor and outdoor temperatures and malfunction codes.
For complete instructions on these and other functions, as well as important safety information, see the Owners Manual.
For more information, visit GreeComfort.com.
Specifications are subject to change without notice. Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice or without incurring obligations. ©2013. All rights reserved.
QUICK-START GUIDE
HIGH-WALL DUCTLESS
AIR CONDITIONING SYSTEM
NOTE: Please read the complete owner's manual
carefully before operation.
ON/OFF Press to power the unit on or off.
Press to select and adjust each mode.
MODE
: COOL
Press to control vertical angle of louvers and to redirect airflow.
Press to boost cooling or heating capacity.
TURBO
Quickest way to reach preset temperature.
Press to select fan speed (Auto, Low, Medium or High.)
FAN
Auto is default.
_
Press to raise or lower settings including temperature and time.
Press once for slow adjustment, hold down for fast adjustment.
+
Press to select one of three SLEEP modes, each offering
varying levels of comfort control while sleeping.
SLEEP
See Owner's Manual for more details.
Press to start or stop the timer. (Adjust with"+" and "–" buttons.)
TIMER
See Owner's Manual for more details.
Press to run fan after cooling cycle to dry off coil and help
X-FAN
inhibit growth of bacteria and mildew.
Press to turn on lights on the unit's Front Panel Display.
LIGHT
Press again to turn off.
Press to set desired room temperature.
TEMP
(Adjust with "+" and "-" buttons.)
: DRY : FAN ONLY