Hamilton Beach Professional B79 Manual Del Usuario página 4

top of the lid, keep exposed
skin away from the lid, and
start blending at lowest speed.
E
21. nsure cutter assembly is
tight and secure to jar. Injury
can result if moving blades
accidentally become exposed.
D
22. o not leave blender
unattended while it is
operating.
C
23. heck that the appliance
is OFF ( ) before plugging
cord into wall socket.
disconnect, turn the control
to OFF ( ); then remove plug
from wall socket.
grasp the plug and pull from
N
the socket.
the power cord.
D
24. o not use appliance for
other than intended purpose.
B
25. e careful if hot liquid is
poured into the blender
container as it can be ejected
out of the appliance due to
sudden steaming.
CAUTION! I
26.
to avoid a hazard due to
SAVE THESE INSTRUCTIONS
4
T
o
T
o unplug,
ever pull from
n order
inadvertent resetting of the
thermal cut-off, this appliance
must not be supplied through
an external switching device,
such as a timer, or connected
to a circuit that is regularly
switched on and off by the
utility.
T
27. he plug is provided with a
13-amp fuse approved by
ASTA
to
you need a replacement fuse
carrier, it must be replaced
with the same colour-
coded carrier with the same
F
markings. use covers and
carriers can be obtained from
approved service agents.
I
28. n manual model do not
exceed normal operating cycle
of 2 minutes ON (I) and 1
minute OFF ( ).
I
n SMOOTHIE
ICE CRUSH
(
appliance to cool for 2 minutes
between each cycle.
I
n HOT SOUP
allow appliance to cool for 10
minutes between each cycle.
B.S.
I
1362. f
or
( )
mode allow
)
mode
( )