Handle Position; Height Adjustment; Transporting Cleaner - Bissell CleanView Plus 4207 Serie Guia Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

O
perations
Power switch
the power switch is located on the left side of the
vacuum. push the rocker switch "on" (i) to vacu-
um, and "off" (o) when cleaning is complete.

Handle position

press the handle release pedal with your foot
to place your cleanView vacuum into one of
three cleaning positions.
1. Upright–
for storage and above floor
cleaning with tools.
2.
Normal cleaning
household floor cleaning tasks.
3. Low cleaning –
normal cleaning position, press handle
release pedal again, use for reaching under
low furniture such as tables, chairs or beds.

Height adjustment

there are five height settings available for
various floor surfaces. turn the dial on the foot
of the cleaner to the desired setting.
Lowest setting
for low pile carpet or bare
floors. to pick up debris, it may be necessary
to move up one setting.
Medium setting – for medium pile carpet.
Highest setting – for high pile and most
shag carpet.
Note: For optimal carpet cleaning
performance, adjust to the lowest
practical setting. If your cleaner is
difficult to push, adjust to the next
higher setting.
if the dial is difficult to turn, tilt the cleaner
back slightly to take the weight off the foot
while turning.

Transporting cleaner

1. to move your cleaner from room to room,
put the handle in the upright position, tilt
the cleaner back on its rear wheels and
push forward.
2. the cleaner can also be moved by using
the carrying handle.
6
w w w . b i s s e l l . c o m
press handle release
With the vacuum in
CAUTION:
Before using your vacuum, make
sure that the dirt tank is in the
locked position and that both
filters (pre-motor and post-motor)
are in place. Do not operate your
vacuum without these filters.
Tip:
hair, string and
small objects can
block the vacuum
hose or tools. check
them occasionally
for obstructions.
Tip:
Your vacuum features a Quick Release cord
wrap. to remove the power cord quickly
and easily, rotate the upper cord wrap
toward the floor and slip the power cord off
the upper and lower cord wraps.
Tip:
before cleaning
under low furniture,
check area first for
objects that might
harm the unit or
block the vacuum
hose
.
8 0 0 . 2 3 7 . 7 6 9 1

Publicidad

Tabla de contenido
loading

Tabla de contenido