Tineco iFloor Serie Manual De Uso página 18

Brush Roller
Remove the brush roller by grabbing the
brush roller tab and pulling upward.
Remove hair and debris from the brush roller
chamber and the opening with a tissue or a
damp cloth.
Remove the brush roller tab. Using the cleaning
tool, remove the hair and debris wrapped around
the roller and rinse with water. Replace the brush
roller back into the accessory holder, and allow it to
dry completely before reinstalling.
①
Replace the brush roller by inserting the brush
roller end into the right side of the holder, then
lock the pull tab into place by pressing downward.
16
②