Adjusting The Harness - Foppapedretti MYO Manual De Instrucciones

GB
CS28
8

ADJUSTING THE HARNESS

Adjust the shoulder straps height so they
are level
shoulders.
4a
To adjust the height of shoulder straps, you
need to take out the straps from the splitter
plate located in the rear of the seat.
4b
4c
Pull both straps through the shell and seat
cover.
4d
Thread the harness straps through the proper
harness slot. Make sure that both straps are
even and not twisted. From the
rear of the seat, secure the harness strap
onto the splitter plate (reverse the 4b). Pull
to make sure the harness straps are firmly
secured onto the splitter plate. Remember,
4e
shoulder straps should be level with, or just
below the child's shoulders (4a).
with, or just below child