Style selections 16IN-42-109B Instrucciones De Ensamblaje página 5

ASSEMBLY INSTRUCTIONS
Note: This item has two installation methods: Wall Mount and Stand Mount. For wall mounting
instructions, proceed to step 1. For stand mounting instructions, skip to step 3.
1. To mount the item to the wall, place wall-mounting
template (I) on wall at desired location. Note: It is
recommended this item be installed to studs, but not
required.
Using a 1/4-inch drill bit (not included), drill a pilot
hole at each of the marked corners on wall-mounting
template (I), then discard wall-mounting template (I).
2. Insert wall anchors (AA) into drilled holes. Note:
Wall anchors (AA) are not required if you are
installing the item to studs.
Then, with the help of another person, lift electric
firebox (A) and insert screws (BB) through holed
tabs on electric firebox (A) and soft pads (DD) and
into wall anchors (AA). Tighten screws (BB) with a
Phillips screwdriver (not included).
Skip to step 5.
Hardware Used
AA Wall Anchor
BB Screw
DD
Soft pad
1
WALL
2
WALL
x 4
x 4
x 4
5
I
DD
AA
BB
A
Lowes.com