AO Smith AO-US-200 El Manual Del Propietario página 8

Install Filter Sumps
Attach each sump to bottom of unit
housing. Align connection points,
push sump in and turn to the right.
Note: Sumps should lock into place.
Connect supply lines
1. Connect tubing from brass tee into
inlet side of filter unit.
2. Connect tubing from faucet into
outlet side of filter unit.
Note: Use diagram to check tubing depth.
It is VERY IMPORTANT to insert tubing
completely (0.95") to prevent leaking.
Tips
Insert tubing completely (0.95") to prevent leaking.
•
Wet end of tubing for easy installation into inlets and outlets.
•
Cut excess tubing to prevent crimping, kinks, loops or folds.
•
1
2
Diagram is actual size.
1
NEED HELP? GIVE US A CALL 877.333.7108
INSTALLATION GUIDE
Depth to insert 2 stage tubing
1 2
2
4