Medion LIFE P15052 Manual De Instrucciones página 134

CI INFORMA
TION CI+
OAD
OAD SCAN
(only for DVB-C)
If you want to watch subscription channels, you must first reg-
ister with the channel provider. Once you have registered,
you will receive a Conditional Access Module (CI module) and
a special card from your provider. You will find information
about the settings in the documentation supplied with the
module.
Install the CI components on your television in the following
way:
 Switch the television off and pull out the mains plug.
 First insert the CI module in the slot on the side of the
Smart TV. Then insert the card.
Please note: only insert or remove the CI module
after you have disconnected the device from the
power supply.
NOTICE!
Risk of damage!
The CI module or the television could
be damaged if you attempt to insert
the CI module by force.
 The CI module must be inserted
correctly: it cannot be inserted if it
is the wrong way round.
 Connect the television to the power supply, switch it on,
and wait for a moment until the card is recognised.
 Additional setup steps may be required for some CAM
modules, which you can complete in the CI INFORMA
TION menu.
Activate/deactivate the Over Air Download option. In doing
so, you enable wireless software updates via DVB-C.
Start search for updated software via DVB-C.
EN
49