Quickstart - NuWave Jubilee 35001 El Manual Del Propietario

JUBILEE SMOKELESS GRILL

QUICKSTART

temp
pause
clear
ON/OFF
Press ON/OFF. This button also stops any cooking function.
While cooking, press ON/OFF to cancel.
START
Select a cooking function, press start to begin cooking. Default is
375˚F for 10 min.
TEMP
Turn pause/clear to adjust the cooking temperature before and
while cooking.
TIME
Turn start to adjust the cooking time before and while cooking.
TOP/BTM
Adjusts the temperature of the Top and Bottom Grill plates. Press TOP/
BTM, turn pause/clear to adjust. Press TOP/BTM to adjust the Bottom
Grill Plate. Temperatures range from 0˚F to 475˚F.
SEAR
Sear your food before the regular cooking process. 525˚F for 2 min.
are the defaults. Press SEAR. If preferred, adjust Sear temp and time
and press start.
Note: The Sear function can be set for before or after regular cooking
cycle. Refer to SEAR in INSTRUCTIONS for details.
WARM
Quickly warm your favorite leftovers. 145°F for 60 min. are the defaults.
Press WARM and use the dials to adjust temperature and time. Press
start to begin.
Note: Refer to WARM in INSTRUCTIONS for details.
PREHEAT
For crispier results, 375˚F is the defaults. If preferred, adjust Sear
temp and time and press start. Once the unit has reached the set
temperature the Jubilee will beep and a 5-minute countdown will
begin. Place your food into the Jubilee, set your cooking temperature
and time, and press start.
PROBE
Use the Digital Probe for perfect results every time. 160˚F is the default.
Plug the Probe into Jubilee unit (Jack). Press and hold PROBE for
2 seconds and set Probe target internal temperature for food using
pause/clear. Insert the other end of the Probe into your food.
Press start to begin cooking.
Note: Refer to Probe in INSTRUCTIONS for details.
12 12
quickstart
SEAR 1 2 TEMP TOP BTM
TIME PREH REDY WARM PROB
Date Name
10-25-18 Controls - Version 7
TOP ON
SEAR
BTM OFF
PRE-
WARM PROBE
HEAT
Doc#
7
time
start