Heat Setting Displays; Optiheat Control (3 Step Residual Heat Indicator); Daily Use; Automatic Switch Off - Electrolux REX KTI6402XE Manual De Instrucciones

Sensor field
5
A heat setting display
6
A control bar
7
8
9
10

3.3 Heat setting displays

Display
-
+ digit
/
3.4 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
from residual heat!

4. DAILY USE

4.1 Activation and deactivation
Touch
activate the appliance.
/
The cooking zone is deactivated.
The cooking zone operates.
The
The Automatic Heat Up function operates.
Power function operates.
There is a malfunction.
OptiHeat Control (3 step Residual heat indicator) : contin-
/
ue cook / stay warm / residual heat.
Lock / The Child Safety Device operates.
Not correct cookware or too small or no cookware on the
cooking zone.
The Automatic Switch Off function operates.
\ \ The risk of burns
for 1 second to activate or de-
Function
To activate the Power function.
To show the heat setting.
To set the heat setting.
To increase or decrease the time.
To set the cooking zone.
To activate and deactivate the STOP+GO
function.
Description
function operates.
OptiHeat Control shows the level of the
residual heat. The induction cooking
zones make the heat necessary for cook-
ing directly in the bottom of the cookware.
The glass ceramic is hot from the heat of
the cookware.

4.2 Automatic Switch Off

The function deactivates the
appliance automatically if:
• All cooking zones are deactivated (
).
• You do not set the heat setting after
you activate the appliance.
ENGLISH 7