Husky 28WC01BP-THD Manual Del Operador página 3

ASSEMBLY
BACK PANEL CONSTRUCTION
Items Needed:
BB - 1/4-20 x 3/4-in Button Head Screw (Qty: 2)
DD - 1/4-20 Serrated Flange Nut (Qty: 2)
C - Back Panel (Qty: 2)
Process:
• Place (2) back panels C with flanges up as shown.
(Use packaging material to prevent scratches.)
• Assemble (2) back panels C, using (2) BB and (2) DD
through flanges.
• Finger tighten.
BB
Figure 1
BB
Figure 1.1
DD
C
DD
ATTACH SIDE PANELS
Items Needed:
BB - 1/4-20 x 3/4-in Button Head Screw (Qty: 4)
DD - 1/4-20 Serrated Flange Nut (Qty: 4)
A - Side Panel (Qty: 2)
• Attach (2) side panels A using (2) screws BB and (2) nuts
DD in middle holes of each side. Leave end holes open
for later assembly.
• Finger tighten.
A
Figure 2
3
DD
BB