Husky 28WC01BP-THD Manual Del Operador página 4

ATTACH BOTTOM AND HINGE PLATES
Items Needed:
AA - 1/4-20 x 5/8-in Carriage Bolt (Qty: 4)
BB - 1/4-20 x 3/4-in Button Head Screw (Qty: 6)
CC - 5/16-in Washer (Qty: 4)
DD - 1/4-20 Serrated Flange Nut (Qty: 10)
NN - Hinge Plate (Qty: 2)
G - Bottom (Qty: 1)
Process:
• I nsert bottom G into one end of assembly and attach
using (6) BB , and (6) DD.
• Finger tighten.
• Attach unit hinges NN to front of unit using (4) AA, (4)
CC, and (4) DD.
Note: When placing a hinge plate (NN) on the unit the
loop of the hinge MUST always face towards the
outside of the unit.
• Finger tighten.
G
Figure 3
NN
AA
CC
DD
BB
4
INSERT INTERIOR SHELF
Items Needed:
AA - 1/4-20 x 5/8-in Carriage Bolt (Qty: 2)
D - Shelf (Qty: 1)
CC - 5/16-in Washer (Qty: 2)
DD - 1/4-20 Serrated Flange Nut (Qty: 2)
Process:
• Place the cabinet in its upright position.
• Insert shelf D from top of unit.
• Place back of shelf in center mounting location in back
of unit, and rotate into place as shown.
• Attach using (2) AA, (2) CC, and (2) DD in square
mounting holes as shown.
• Finger tighten.
Figure 4
D
AA
DD
CC