Husky 28WC01BP-THD Manual Del Operador página 5

MOUNTING OPTION 1 FOR HANGING CABINET
ON HUSKY® TRACKWALL
Items Needed:
B - Top (Qty: 1)
BB - 1/4-20 x 3/4-in Button Head Screw (Qty: 6)
DD - 1/4-20 Serrated Flange Nut (Qty: 6)
H - Mounting Bracket (Qty: 1)
RR - Bracket - Wall (Qty: 1)
• Attach top B and mounting bracket H, as shown
using, (6) BB and (6) DD.
• Finger tighten.
H
BB DD
Figure 5
• Remove the two screws and nuts from the center of
the unit.
• Place the Bracket - Wall on the back of the unit and
secure with the screws and nuts removed earlier.
• Finger tighten.
Figure 5.1
B
DD
RR
BB
5
MOUNTING OPTION 2 FOR HANGING CABINET
DIRECTLY TO WALL
Items Needed:
B - Top (Qty: 1)
BB - 1/4-20 x 3/4-in Button Head Screw (Qty: 6)
DD - 1/4-20 Serrated Flange Nut (Qty: 6)
Process:
Note: Option 2 is for hanging cabinet directly on wall.
Holes are provided for studs on 16-in and 24-in centers.
Assembly shown for installation on 16-in centers.
• Attach top B as shown using (6) screws BB, and
(6) nuts DD.
• Finger tighten.
BB
Figure 6
Note: Holes in back of cabinet are spaced to allow
mounting on studs with 16-in centers or 24-in centers.
Leave outside holes open to mount to studs on 24-in
centers. Leave inside holes open to mount to studs on
16-in centers.
24-in
16-in
Figure 6.1
DD
B