Other Functions - Ecom Ex-PMR 2000 Instrucciones De Uso

Channel selection
Turn the channel selection knob to set the desired channel. The radio unit
announces the current channel number.
Transmitting
To transmit a message press and hold the PTT button for the duration of your
message. Speak normally into the microphone and make sure that the unit is
positioned approx. 2.5 cm to 5 cm away from your mouth.
Receiving
After transmitting a message release the PTT button to receive messages via
your radio unit.
8.4.3

Other functions

The following functions can be programmed via the optional software.
Call
Press and hold the pre-programmed button „Call 1/Call 2" to transmit the
stored DTMF/5-tone/HDC 2400
Emergency call
When the pre-programmed emergency call button is actuated, the radio unit
transmits an emergency call or an identification number (ENI, background
audio frequency to a partner or a system).
Possible button allocations are:
Mode 1
Mode 2
Time alarm (lone worker mode)
The time alarm enables the user to conduct safety-critical lone work. Actuate
the pre-programmed button „Lone Worker" to activate this mode. If the user
does not actuate any buttons within the preset time, the radio will emit a
warning tone. This warning tone can be cancelled by pressing any button,
otherwise the radio will revert to the emergency call mode after a brief time
interval and an emergency call will be transmitted.
code.
TM
Activate emergency call
Long press
Short press
Cancel emergency call
Short press
Long press
31