Special Conditions For Use In Potentially Explosive Areas; Safety Information; Ex-Data - Ecom Lite-Ex PL 10 H Instrucciones De Uso

4.1 Special conditions for use in potentially explosive
areas
- Storage of the lamp in these areas is prohibited!
- After changing the batteries or the sealing rings always
check to make sure the sealing rings and threads are clean
and in good condition.
- Before using the lamp in the Ex-area make sure the
housing components are screwed tightly by hand and/
or as far as their stop in order to ensure the IP rating is
maintained.

5. Safety information

Risk of blinding!
- Do not look directly into the beam of light!
Do not aim the light directly into the eyes of another
person!

6. Ex-data

EC type approval test certificate no.:
ZELM 05 ATEX 0272 X
Ex-designation:
1G Ex ia op is IIC T4 or T3 Ga
1D Ex ia IIIC T130°C Da
Approved for Zone 2, 1 and 0, device group II, gas group IIC
(explosive gases, vapours or mist), temperature class T4.
Approved for Zone 22, 21 and 20, device group III, explo-
sive dust, IIIC – conductive dust, IIIB – non-conductive dust,
IIIA – flammable fibres, T130°C
19