Attaching The Fan Blades - Home Decorators Collection 51549 Guía De Uso Y Mantenimiento

Assembly - Hanging the Fan (continued)
8

Attaching the fan blades

□
Attach a blade (C) to the fan-motor housing (B) by inserting
the blade (C) into slots in the side of the fan motor housing
(B) and aligning the three screw holes in the blade with the
holes in the center flywheel and secure with screws (AA).
□
Make sure all the screws are firmly tightened.
B
C
AA
9
Attaching the light kit fitter
assembly
□
Attach the light kit fitter assembly (D), remove the one
screw (HH) in the round hole, from the switch cup (JJ), and
loosen, but do not remove the other three screws.
□
Connect the blue wire exiting the bottom of the fan motor
assembly (B) with the black wire from the top of the light kit
fitter assembly (D).
□
Connect the white wire exiting the bottom of the fan motor
assembly (B) with the white wire from the top of the light kit
fitter assembly (D).
□
Push the light kit fitter assembly (D) up to the light kit pan
so that the three loosened screw heads fit into the keyhole
slots. Turn the light kit fitter assembly (D) clockwise to
secure.
□
Re-install the screw (HH) that was removed in step 1.
□
Make sure all the screws are firmly tightened.
B
JJ
D
HH
11
Please contact 1-800-986-3460 for further assistance.
HOMEDEPOT.COM/HOMEDECORATORS