Contents
CONTENTS
Contents ....................................................................... 3
WS 460 ......................................................................... 9
Fit the blade .................................................................. 12
Flush cutting ................................................................. 12
Before starting .............................................................. 14
Starting ......................................................................... 14
Stopping ........................................................................ 14
Cleaning ........................................................................ 14
Track 360 ...................................................................... 15
Track 400 series ............................................................ 16
Maintenance ................................................................. 17
Repairs ......................................................................... 17
WS 460 ......................................................................... 18
EQUIPMENT ................................................................. 19
CONTENTS
Note the following before starting:
!
WARNING! Cutting, especially when DRY
cutting, generates dust that comes from the
material being cut, which frequently
contains silica. Silica is a basic component
of sand, quartz, brick clay, granite and
numerous other minerals and rocks.
Exposure to excessive amount of such dust
can cause:
Respiratory disease (affecting your ability to
breath), including chronic bronchitis,
silicosis and pulmonary fibrosis from
exposure to silica. These diseases may be
fatal;
Skin irritation and rash.
Cancer according to NTP* and IARC*
*/ National Toxicology Program, International
Agency for Resaearch on Cancer
Take precautionary steps:
Avoid inhalation of and skin contact with
dust, mist and fumes.
Wear and ensure that all bystanders wear
appropriate respiratory protection such as
dust masks designed to filter out
microscopic particles. (See OSHA 29 CFR
Part 1910.1200)
Wet cut when feasible, to minimize dust.
- 3
English