Safety Instructions; Steps Before Using A New Wall Saw; Always Use Common Sense - Husqvarna WS 460 Manual De Instrucciones

Steps before using a new wall saw

• Please read the operator's manual carefully and make
sure you understand the instructions before using the
machine.
• This machine is designed for and intended for sawing
concrete, brick and different stone materials. All other use
is improper.
• This machine is intended for use together with a
Husqvarna PP 3300, Husqvarna PP 2525 and Husqvarna
PP 2325. If the saw is used with another hydraulic unit, the
unit must be compatible with the conditions required by
the saw.
• The machine is intended for use in industrial applications
by experienced operators.
• Please read the operator´s manual supplied with the
hydraulic unit before using the machine.
• The machine can cause serious personal injury. Read the
safety instructions carefully. Learn how to use the
machine.

Always use common sense

It is not possible to cover every conceivable situation you can
face. Always exercise care and use your common sense.
Avoid all situations which you consider to be beyond your
capability. If you still feel uncertain about operating
procedures after reading these instructions, you should
consult an expert before continuing.
Do not hesitate to contact your dealer if you have any more
questions about the use of the machine. We will willingly be of
service and provide you with advice as well as help you to use
your machine both efficiently and safely.
Let your Husqvarna dealer regularly check the machine and
make essential adjustments and repairs.
All information and all data in the Operator's Manual were
applicable at the time the Operator's Manual was sent to print.
WARNING! Under no circumstances may the
!
design of the machine be modified without
the permission of the manufacturer. Always
use genuine accessories. Non-authorized
modifications and/or accessories can result
in serious personal injury or the death of the
operator or others.
WARNING! Use of products which cut, grind,
!
drill, sand or shape material can generate
dust and vapors which may contain harmful
chemicals. Know the nature of the material
being worked on and wear appropriate dust
mask or respirator protection.

SAFETY INSTRUCTIONS

WARNING! Some dust created by power
!
sanding, sawing, grinding, drilling, and other
construction activities contains chemicals
known (to the State of California) to cause
cancer, birth defects or other reproductive
harm. Some examples of these chemicals
are:
Lead from lead-based paints.
Crystalline silica from bricks, cement and
other masonry products.
Arsenic and chromium from
chemicallytreated lumber.
Your risk from these exposures varies,
depending on how often you do this type of
work. To reduce your exposure to these
chemicals: work in a well ventilated area,
and work with approved safety equipment,
such as those dust makes that are specially
designed to filter out microscopic material.
– 5
English