Chauvet Gobo Shot 50W IRC Guía De Referencia Rápida página 4

Gobo Shot™ 50W IRC QRG EN
IRC Sensor
LED Display
Power In
DMX In
Fuse
Holder
DMX Out
Overview (Back)
Power Out
Wired Remote In
Control Buttons
Safety Loop
Wired Remote Out
Back Panel View
AC Power
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
Power Linking
For the maximum number of Gobo Shot™ 50W IRC that you can power link
at each voltage, see the sticker on the product or the User Manual.
Fuse 1. Disconnect the product from power.
2. Using a flat-head screwdriver, loosen the fuse holder and pull straight out.
Replacement
3. Remove the blown fuse from the holder and replace with a fuse of the exact
same type and rating.
4. Re-insert the fuse holder and reconnect power.
4