FAR CMF2015 CI Manual De Utilización página 69

ENGLISH
WARNING
Do not use this appliance at the same time as other electrical appliances that are
1.
plugged into the same socket.
Do not place the appliance in wet/damp or unstable places.
2.
Keep the appliance away from flames and heat sources.
3.
Do not heat the internal tank over a naked flame.
4.
Keep the appliance out of reach of children, as there could be a risk of injury if
5.
improperly used.
Keep your face and hands away from the steam vents on the outer lid.
6.
Do not submerge the appliance in water or any other liquid, as this could be
7.
dangerous.
Do not cover the steam vents with a cloth on the lid, as this could cause
8.
deformation and discolouration of the lid.
The power cord must not be twisted or tied. To unplug the appliance, pull on the
9.
plug and not the cord. If the power cord is damaged, replace it with the identical
specific cord and not anything else.
Do not cook acidic or alkaline foods or alkaline substances, as this could corrode the
10.
internal tank.
Clean the appliance with a damp sponge or soft scouring pad and a gentle cleaning
11.
product. After a long time of use, the non-stick coating may detach from the surface
slightly, but this is not harmful and does not affect cooking.
Switch the appliance off when you are not using it.
12.
When the screen displays "E5", press the Off button to go back to standby mode,
13.
and then restart the appliance.
Children must not play with the appliance.
14.
The surface of the heating element will stay hot for a certain amount of time after
15.
use.
WARNING: Improper use may cause injury.
16.
WARNING: Avoid splashing or spilling liquids on the electrical connections.
17.
Do not submerge the appliance in water, as this is dangerous.
18.
Use the appliance on a flat and stable work surface.
19.
The appliance is not designed to work with an external timer or a separate remote
20.
control system.
GB-14
STEAM VALVE
Disassemble the steam valve (as shown by the black arrow).
Disassemble the steam valve from the outer lid.
1.
Press the steam valve holder in the direction of the arrow and turn the pivoting
2.
latch of the steam lid to unlock it.
Then open the steam valve holder upwards to detach the steam lid and valve holder.
3.
Remove the steam connector from the groove and clean it.
4.
Do not twist it and do not pull the top.
Reassemble the steam valve (as shown by the white arrow).
Place the steam connector the right way round in the groove, without twisting it.
1.
The steam lid is assembled on the steam valve holder.
2.
Use one hand to press down on the steam valve holder, and turn the pivoting latch
3.
to the locked position with the other hand.
The steam lid is locked in place when you hear a click.
Correctly insert the valve into the valve hole in the outer lid.
4.
Assemble
Disassemble
Pull
Press
Disassemble
Reduce
Assemble
Disassemble
Steam valve holder
Steam connector
Steam cover
Pivoting latch
ENGLISH
Increase
Assemble
GB-15