Cleaning Foam Exhaust Filter; Changing Dust Bag - Panasonic MC-V5706 Instrucciones De Operación

Ocultar thumbs Ver también para MC-V5706:
Tabla de contenido

Publicidad

Always operate vacuum with genuine Panasonic Type U3 Standard or U6
Electrostatic dust bags installed. Panasonic dust bags may be purchased through
any authorized Panasonic dealer or ordered from service company.

Cleaning Foam Exhaust Filter

Exhaust Filter
Filtre d'évacuation
Filtro de escape
Dust Cover
Couvercle
Cubierta de
polvo

Changing Dust Bag

➢ ➢ The foam exhaust filter removes dirt
from recirculated air.
➢ ➢ Check filter when installing a new
dust bag.
➢ ➢ If dirty, remove filter from bottom of
the dust cover by pulling straight up
on filter and clean by rinsing in water.
➢ ➢ When dry, place filter back into dust
cover
➢ ➢ Align six (6) filter slots with six (6) dust
cover tabs and press into place.
1)
➢ ➢ Pull outward on dust cover grip to
remove the dust cover.
2)
➢ ➢ Remove dust bag by grasping
cardboard portion and pulling out.
3)
➢ ➢ Spread out new dust bag, taking care
not to tear bag.
- 22 -

Publicidad

Tabla de contenido
loading

Tabla de contenido