Grounding Instructions - Skil SRT1039 Manual Del Propietário

GROUNDING INSTRUCTIONS

In the event of a malfunction or breakdown, grounding provides a path of least resistance for
electric current to reduce the risk of electric shock. This tool is equipped with an electrical cord
that has an equipment-grounding conductor and a grounding plug. The plug must be plugged
into a matching outlet that is properly installed and grounded in accordance with all local codes
and ordinances.
Do not modify the plug provided. If it will not fit into the outlet, have the proper outlet installed
by a qualified electrician.
Improper connection of the equipment-grounding conductor can result in a risk of electric
shock. The conductor with insulation that has an outer surface that is green with or without
yellow stripes is the equipment-grounding conductor. If repair or replacement is necessary, do
not connect the equipment-grounding conductor to a live terminal.
Check with qualified electrician or service personnel if the grounding instructions are not
completely understood, or if in doubt as to whether the tool is properly grounded.
Use only 3-wire extension cords that have 3-prong grounding plugs and 3-pole receptacles
that accept the tool's plug.
Repair or replace damaged or worn cord immediately.
This tool is intended for use on a circuit that has
an outlet (sketch B). The tool has a grounding
pin (sketch A). A temporary adapter (sketches
C and D) may be used to connect this plug to
a 2-pole receptacle (sketch C), if a properly
grounded outlet is not installed by a qualified
electrician. The green-colored rigid ear, lug, and
the like, extending from the adapter must be
connected to a permanent ground, such as a
properly grounded outlet.
A.
Grounding
pin
D.
Grounded means
Metal
screw
B.
C.
Cover of
grounded
outlet box
7